NTI KEEMUX PS2 KVM Switch

No reviews yet

Product Code: network-technologies-ps-2-kvm-switch

$0.00

Control Up To 32 DVI/VGA Computers from 1 PS2 Console

Features & Applications

These electronic KVM switches allow one keyboard, monitor and mouse to control up to 128 computers. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached PC 100% of the time so all computers boot error free.

Control all network computers from one office.
Improve manageability of your computer room - eliminate extra cables, monitors, keyboards and mice.
Compatible with all PS/2-style PCs and laptops, HP9000, Silicon Graphics and IBM RS6000 workstations.
Compatible with IntelliMouse®.
Auto scan all computers to catch system failures early.
Broadcast keystrokes to all computers for simultaneous shut-downs.
Cascade smaller KVM switches together as your network grows-up to 128 ports.

Compatibility

Control Methods

Keyboard

All connectors are female.
Connector is 6 pin miniDIN.
Keyboard and mouse presence are emulated 100% of the time so all computers boot error-free.
Keyboard and mouse are hot-pluggable.
PC switch Will hard or soft boot all PCs 100% of the time.
SCROLL-, CAPS- & NUM- LOCK lights update upon switching.

Mouse

All connectors are female.
Connector is 6 pin miniDIN.
Compatible with all standard 2-button PS/2 mice as well as the following:
- Alps Glidepoint Touchpad-extended functions (i.e. tapping, etc.) are not supported.
- Cirque Glidepoint Touchpad.
- IBM Scroll Point mouse-extended stick functions are not supported.
- Kensington Orbit Trackball.
- Logitech (and other) 3-button mice.
- Logitech 2-button Wheel Mouse.
- Microsoft Ballpoint mouse.
- Microsoft IntelliMouse.

Monitor-VGA

Bandwidth is 150MHz.
Supports 1900x1200 resolution with no degradation.
All connectors are female 15 pin high density VGA.

Power

Two-port switches draw power from attached computers.
110 or 220 VAC at 50 or 60Hz for all switches with more than two ports.

Buttons on Front

Touch a button and be connected to a CPU or change modes of operation.
LEDs indicate currently selected port and mode of operation.
Hold in any button for more than two seconds to go into Scan Mode, Broadcast Mode or Command Mode.
- Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode feature causes the switch to automatically and sequentially display the video from each powered on computer for 2-255 seconds.
- Broadcast Mode feature allows the user's keystrokes to be sent to all powered on computers.
- Command Mode allows the user to give instructions to the switch through their keyboard. Keystrokes are not passed to the computer.

Keyboard

Type CONTROL + ` to go into Command Mode. ("`" is the accent mark located on the same key as the tilde "~")
Press ESCAPE to leave Command Mode and return to Normal Mode
Scan Mode, Broadcast Mode or Command Modes are available from the keyboard

Wiring diagram of 4 port PS/2 kvm switch

More details

Questions
Shipping
Why us?

Control Up To 32 DVI/VGA Computers from 1 PS2 Console

Features & Applications

Control all network computers from one office.
Improve manageability of your computer room - eliminate extra cables, monitors, keyboards and mice.
Compatible with all PS/2-style PCs and laptops, HP9000, Silicon Graphics and IBM RS6000 workstations.
Compatible with IntelliMouse®.
Auto scan all computers to catch system failures early.
Broadcast keystrokes to all computers for simultaneous shut-downs.
Cascade smaller KVM switches together as your network grows-up to 128 ports.

Compatibility

Control Methods

Keyboard

All connectors are female.
Connector is 6 pin miniDIN.
Keyboard and mouse presence are emulated 100% of the time so all computers boot error-free.
Keyboard and mouse are hot-pluggable.
PC switch Will hard or soft boot all PCs 100% of the time.
SCROLL-, CAPS- & NUM- LOCK lights update upon switching.

Mouse

All connectors are female.
Connector is 6 pin miniDIN.
Compatible with all standard 2-button PS/2 mice as well as the following:
- Alps Glidepoint Touchpad-extended functions (i.e. tapping, etc.) are not supported.
- Cirque Glidepoint Touchpad.
- IBM Scroll Point mouse-extended stick functions are not supported.
- Kensington Orbit Trackball.
- Logitech (and other) 3-button mice.
- Logitech 2-button Wheel Mouse.
- Microsoft Ballpoint mouse.
- Microsoft IntelliMouse.

Monitor-VGA

Bandwidth is 150MHz.
Supports 1900x1200 resolution with no degradation.
All connectors are female 15 pin high density VGA.

Power

Two-port switches draw power from attached computers.
110 or 220 VAC at 50 or 60Hz for all switches with more than two ports.

Buttons on Front

Touch a button and be connected to a CPU or change modes of operation.
LEDs indicate currently selected port and mode of operation.
Hold in any button for more than two seconds to go into Scan Mode, Broadcast Mode or Command Mode.
- Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode feature causes the switch to automatically and sequentially display the video from each powered on computer for 2-255 seconds.
- Broadcast Mode feature allows the user's keystrokes to be sent to all powered on computers.
- Command Mode allows the user to give instructions to the switch through their keyboard. Keystrokes are not passed to the computer.

Keyboard

Type CONTROL + ` to go into Command Mode. ("`" is the accent mark located on the same key as the tilde "~")
Press ESCAPE to leave Command Mode and return to Normal Mode
Scan Mode, Broadcast Mode or Command Modes are available from the keyboard