NTI SERIMUX-S-16
• Available ⓘ
This product is available for order. Lead times vary by product and manufacturer.
A lead time will be provided after the order has been placed, or upon request before ordering.
Request Current Lead Time
Lead time and availability are subject to change without notice.
MSRP:
$1,515.00
$1,425.88
-->
(You save
$89.12
)
16-Port SSH Console Serial Switch with Environmental Monitoring & AC power
The SERIMUX-S-16 Secure SSH Console Serial Switch delivers secure management of up to 16 serial devices via the internet, TCP/IP network, or dial-up modem connections. It combines the advanced security of Secure Shell v2 with unlimited access to remote network management.
- Operates on a hardened Linux system.
- Connect up to 16 devices with different baud rates, parity, and character length. Each switch also has one RJ45 connector for a local terminal.
- Eliminates the need to connect each device to an ASCII terminal or PC.
- Provides out-of-band access to network devices (servers, routers, network switches, and any other network devices allowing console operation using RS232).
- Connects to console serial ports using standard CAT5/5e/6 cables and cable adapters.
- Maximum cable length is 1000 feet (305 meters).
- USB port provides expanded logging storage, configuration export and additional functionality.
- High quality, rugged steel construction with durable powder coat finish.
- Gain access to servers without interrupting service to end-users; maintain optimal up-time.
- Monitor environmental conditions.
- Supports two sensors, including: temperature, humidity, and water detection.
- When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, web page, and network management (SNMP).
- Power cycle without halting SUN host computer.
- No inadvertent "break" signals are generated to cause unintentional rebooting of SUN computers.
- Powerful diagnostic and event management features (data capture, notification and scripting) assist in the quick location of the source of equipment failures and minimize downtime.
- Enhanced security features to protect the system - Secure Shell (SSH v2), individual port authentication, HTTPS.
- Switching is simplified with programmable device names and menu-driven device selection.
- All configuration parameters are stored in non-volatile memory.
- Configuration parameters can be imported from USB Flash drive.
- Firmware upgradeable "in-field" through console port, Ethernet, or an attached USB Flash drive.
- 1U case is standard. Includes rack mounting kit.
Product Specifications
| Compatibility | Supports most devices with an RS232 serial port. Supports VT Terminals |
| Serial Interface | 16 RJ45 EIA-232 serial port connectors One RJ45 EIA-232 console port connector Each individual serial port is fully configurable- All industry-standard baud rates ranging from 50 up to 115.2kbps RTS/CTS, Xon/Xoff or both handshaking schemes Variable character widths- 5, 6, 7, or 8 bits Stop bits - 1 or 2, as well as Parity- Odd, Even and None Flow Control: Hardware RTS/CTS Software XON/XOFF Signals: RS232 CTS, DSR, RXD, GND, DCD, TXD, DTR, RTS Modem control: DTR/DSR and RTS/CTS Data transfer rate: up to 115.2K baud between two ports Two ports can be at different baud rates |
| Network Interface | Two 10/100 Base-T Ethernet ports with RJ45 Ethernet connector Supports both static and dynamic IP addresses |
| Power | Input Voltage: AC 100 to 240 V, 50 to 60 Hz (Country-specific power supply cable included.) |
| RJ45 Sensor Ports | Two RJ45 modular jacks for connecting NTI temperature, humidity, temperature/humidity, and liquid detection sensors. |
| Internal Sensors | Temperature: Applications from 32 to 104°F (0 to 40°C). Accurate to within ±1.35°F (±0.75°C). |
| Memory | 32 MB Flash memory Female USB 2.0 Type A connector for storage devices |
| Logging and Buffering | System log, event-log of user activity and on-line data buffering Data-logging with date and time-stamp, locally The log can be downloaded as a tab-delimited plain text file and/or sent to an external syslog server. |
| Dimensions | 16-port switch WxDxH (in): 16.20x9.00x1.75 (without supplied rack ears kit) 19x9.00x1.75(with supplied rack ears kit) |
| Regulatory Approvals | CE, RoHS |
| MTBF | 44,783 Hours |
| Enviromental | Operating temperature: 32 to 104°F (0 to 40°C) Storage temperature: -20 to 140°F (-30 to 60°C) Operating and Storage Relative Humidity: 17 to 90% non-condensing RH |
| Adapters | Four cable adapters are included with the SERIMUX Male DB-25F to female RJ45 Female DB-9F to female RJ45 Female DB-25M to female RJ45 Male DB-25M to female RJ45 |
| Protocols | SSH V2, Telnet, IPV4, IPV6, TCP/IP, TFTP, DHCP, ICMP, UDP, ARP HTTP, HTTPS, SMTP, SNMP V1/V2c, Syslog, SNTP, IPMI v2, RMCP Alerts are sent using email, and/or SNMP traps when any monitored environmental condition exceeds a user-specified range. |
| Warranty | Two Years |