Zoom the image with the mouse
Adder CATX-DP-USBA
• Available ⓘ
This product is available for order. Lead times vary by product and manufacturer.
A lead time will be provided after the order has been placed, or upon request before ordering.
Request Current Lead Time
Lead time and availability are subject to change without notice.
Video Type:
DisplayPort
MSRP:
$215.00
$193.50
-->
(You save
$21.50
)
DisplayPort, USB & Audio
Computer Access Module
Computer Access Module
Adder CATx DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 1000 feet / 300 meters. The CATX-DP-USBA CAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT cabling to the AdderView CATx KVM switches or Adder extender receivers (either AdderLink X2 Silver or X200). Your video display, keyboard, mice and speakers are then all linked to the remote device. The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. The CAM supports low speed (1Mb/s) HID USB devices only. This unit also offers 2 channel CD Quality audio that is supported via a 3.5mm jack plug.
Adder CATX-DP-USBA Features
High Definition DisplayPort Video
The CATX Display port Computer Access Modules allow you to extend your DisplayPort equipped computer over a single CATX cable; The maximum resolutions achievable are:- 1920 x 1200 @ 60Hz - up to 650 feet (200 meters)
- 1280 x 1024 @ 60Hz - up to 1000 feet (300 meters).
USB Powered - No external power supplies needed
The CATX DisplayPort CAM uses USB to pull power from the source host computer, eliminating the need for any separate power supply and thus simplifying installation. The USB cable must be connected to a USB port on the computer that is capable of providing up to 500mA; Power is not taken from the DisplayPort connector.
EDID Display Information
The CATX-DP-USBA module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. This will ensure perfect resolution and availability of each video source during switching.
USB
Adder CATx DisplayPort CAM supports USB HID 1Mb/s (low speed) devices such as standard keyboards and mice.
2-Channel Audio
2 channel CD Quality audio is supported via a 3.5mm jack plug. Note, audio is not available through the display port connector.
'Zero-U' Palm-sized
Measuring at only 1 in x 1.75 in x 3 in, and weighing only 100 g, Adder CATx DisplayPort CAM is a compact unit that fits in your palm, and takes 0U at the rack.
Plug and Play
Adder CATx CAMs are delivered in a zero configuration state so you can plug them in and start working on them straight away. There is no need for drivers or software to be installed.
Multi-platform support
Adder CATx CAMs are designed to be OS-independednt and work with all known software and computer platforms, including Windows, DOS, Linux, Unix, BSD, Sun OS), Mac OS, NetWare, etc.
CATX-DP-USBA Package Contents
- (1) CATX-DP-USBA Computer Access Module
- (1) 2-Year Limited Warranty & Lifetime Support
CATX-DP-USBA Resources
Adder CATX-DP-USBA Specifications
| Mechanical | |
| Height | 1 in. (25 mm.) |
| Width | 1.75 in. (45 mm.) |
| Depth | 3 in. (75 mm.) |
| Weight | 0.2 lb. (100 g.) |
| Environmental | |
| Operating Temperature | 0°C to 40°C / 32°F to 104°F |
| Power | |
| Operating Voltage | USB powered device Max 500mA @ 5V |
| O/S Compatibility | Operating system independent |
| Standards | |
| Approved Agency | CE, FCC |
| ECCN (Export Classification Control Number) | EAR99 |
| HTS (Harmonized Tariff Schedule) | 8471.80.10 ('Control or adapter units') |
| Connections | |
| Port | 1 x Display Port; |
Resolution |
|
Max Resolution & Extension | 1920 x 1200 x 60Hz at 200m (650ft) 1280 x 1024 x 60Hz at 300m (1000ft) |
DisplayPort, USB & Audio
Computer Access Module
Computer Access Module
Adder CATx DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 1000 feet / 300 meters. The CATX-DP-USBA CAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT cabling to the AdderView CATx KVM switches or Adder extender receivers (either AdderLink X2 Silver or X200). Your video display, keyboard, mice and speakers are then all linked to the remote device. The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. The CAM supports low speed (1Mb/s) HID USB devices only. This unit also offers 2 channel CD Quality audio that is supported via a 3.5mm jack plug.
Adder CATX-DP-USBA Features
-
High Definition DisplayPort Video
The CATX Display port Computer Access Modules allow you to extend your DisplayPort equipped computer over a single CATX cable; The maximum resolutions achievable are:- 1920 x 1200 @ 60Hz - up to 650 feet (200 meters)
- 1280 x 1024 @ 60Hz - up to 1000 feet (300 meters).
-
USB Powered - No external power supplies needed
The CATX DisplayPort CAM uses USB to pull power from the source host computer, eliminating the need for any separate power supply and thus simplifying installation. The USB cable must be connected to a USB port on the computer that is capable of providing up to 500mA; Power is not taken from the DisplayPort connector.
-
EDID Display Information
The CATX-DP-USBA module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer. This will ensure perfect resolution and availability of each video source during switching.
-
USB
Adder CATx DisplayPort CAM supports USB HID 1Mb/s (low speed) devices such as standard keyboards and mice.
-
2-Channel Audio
2 channel CD Quality audio is supported via a 3.5mm jack plug. Note, audio is not available through the display port connector.
-
'Zero-U' Palm-sized
Measuring at only 1 in x 1.75 in x 3 in, and weighing only 100 g, Adder CATx DisplayPort CAM is a compact unit that fits in your palm, and takes 0U at the rack.
Plug and Play
Adder CATx CAMs are delivered in a zero configuration state so you can plug them in and start working on them straight away. There is no need for drivers or software to be installed.
Multi-platform support
Adder CATx CAMs are designed to be OS-independednt and work with all known software and computer platforms, including Windows, DOS, Linux, Unix, BSD, Sun OS), Mac OS, NetWare, etc.
CATX-DP-USBA Package Contents
- (1) CATX-DP-USBA Computer Access Module
- (1) 2-Year Limited Warranty & Lifetime Support
CATX-DP-USBA Resources
Adder CATX-DP-USBA Specifications
| Mechanical | |
| Height | 1 in. (25 mm.) |
| Width | 1.75 in. (45 mm.) |
| Depth | 3 in. (75 mm.) |
| Weight | 0.2 lb. (100 g.) |
| Environmental | |
| Operating Temperature | 0°C to 40°C / 32°F to 104°F |
| Power | |
| Operating Voltage | USB powered device Max 500mA @ 5V |
| O/S Compatibility | Operating system independent |
| Standards | |
| Approved Agency | CE, FCC |
| ECCN (Export Classification Control Number) | EAR99 |
| HTS (Harmonized Tariff Schedule) | 8471.80.10 ('Control or adapter units') |
| Connections | |
| Port | 1 x Display Port; |
Resolution |
|
Max Resolution & Extension | 1920 x 1200 x 60Hz at 200m (650ft) 1280 x 1024 x 60Hz at 300m (1000ft) |
No resources are available for this product at this time.
Request a document below.*
For information regarding orders or shipping, please visit the Ordering Information page.
*Subject to availabilityRelated Products